The PRI25TI is a horn loaded version of Audax's 25mm fabric dome tweeter, similar to the one we use in KLS3. The spec suggested a whopping 97db, sensitivity along with good power handling. To accompany them, I chose a bass driver also from the professional range, the PR240MO. This is a powerful 10in. Paper cone driver with an impressive specification. It has a strong cast chassis, and best of all, a sensitivity of 95db. But has greater bass depth and impact, as well as improved power handling.

Cabinet design

KLS8 uses a large, sealed or infinite baffle enclosure. The cabinet completely encloses the rear of the drive unit, the springiness of the air in the box providing the correct loading. Although not as efficient as an equivalent reflex design, a sealed cabinet does tend to give a tighter, faster bass quality.
KLS8 is a largish standmounter, its cabinet some 50litres in internal volume.




Technical Data:

Nominal power handling 80 W
Peak power handling 120 W
Nominal impedance 8 Ohm
Frequency response 40 - 20000 Hz
Sensitivity (nominal) 91 dB
(1 W/1 m)
Crossover frequency 2000 Hz
Cabinet type Bassreflex
Net volume 34 l
Height 1000 mm
Width 260 mm
Depth 350 mm

CAD Audio DK - Røjlevej 8B - DK 5935 Bagenkop - Tlf/fax : 38 33 40 48

Email; km_cad@yahoo.com