|
|
||
|
D700A PWM Amplifier
|
D700A specs |
|
|
Rated power 4 ohms |
700W |
|
|
Power supply max. |
2 x 45V DC |
|
|
Aux. supply |
16V DC |
|
|
Freq. Range (+0, -1dB) |
20 – 20.000 Hz |
|
|
THD + N |
0.015% typ. |
|
|
Dynamic Range |
110 dB typ. |
|
|
Max. output current |
20A |
|
|
Min. load impedance |
4 ohms |
|
|
Damping Factor |
400 typ. |
|
|
Input voltage |
1V - 10 k - balanced |
|
|
Operation |
Full bridge amplifier |
|
|
DC-servo |
yes |
|
|
Peak limiter |
yes |
|
|
Dimensions |
112 x 76 x 25mm |
|
|
Heatsink |
Not required |
|
|
Available as sample |
yes |
|
|
Available as OEM design |
yes |
|
|
|
D700A is a PWM / Class-D amplifier designed to give very high performance in audio quality and to deal with all aspects of amplifier use and applications including amplifier + power supply combination, multichannel use , active crossover use, etc.
Power output is 700 W into 4 ohms, overcurrent protection is likely to operate with continuous high power levels into 2 ohms.
D700A is a full bandwidth module (20 kHz power bw) and can be used for a broad range of applications from HIFI, Home Cinema to Pro Audio, Active Speakers, Installation... Sound quality is very good indeed and THD + N is 0.015% or better. The D700A can be powered from a linear supply or from a switch-mode supply .
D700A has these connections: * Balanced input header (3-pin molex) * +/- 15V dc supply for preamp, crossover etc.
* Power input (4-pin connector) 2 x 45VDC + 16VDC
|
|
|
©2008 - all rights reserved - digiamps.com (a division of CAD Audio dk) |
||
